Dust can cause a lot of harm to the construction site if it’s not well taken care of. For this reason, you have to come up with a sustainable way to remove dust from air. When you excavate during construction and loosen the soil, the wind will pick up the dust and transport it elsewhere. So you have to put in dust control measures at your construction site. Any dust control plan can come in handy, but you will need a prolonged plan to help you control the dust over a long time. Here are the top 3 ways to control dust at your construction site.
Applied Polymers
Polymers provide an excellent solution for dust control. They are, however, important in places where vehicles do not have access. A great place to use polymers is in an excavated area where the topsoil is loose. These places include hillsides where trucks and vehicles do not have access. They work well as an overall dust control plan. You can visit sites like bosstek.com to see quotes and how you can employ polymers for dust control. Polyvinyl acrylic polymer requires two processes to work. They are first applied to the soil in a dry state, and then water is sprayed to activate it and create a seal over the soil. Please note that the use of polymer might be regulated in your state, so be sure to confirm that before using it.
Use Vegetation and Mulch
This is one of the best methods to control dust on your construction site. You will only need to plant the vegetation and not have to worry about it. Even then, you need to water the vegetation until it is established; other than that, there is not much you can do. Mulch by itself works, but it can do better when you add foliage. Mulch will cover the exposed and loose soil, so the soil stays in place even when the winds kick in. The root system of the vegetation keeps the soil in place and keeps it intact as well. The grass covers and guards the soil against the wind when it starts growing.
Using Water and Barriers
Using water in form of mist is probably one of the most common ways construction sites use to control dust. Loose dirt is easily picked up by the wind and tossed around by the heavy equipment in a construction site. It is, however, essential to ensure that you do not use too much water. The right amount of water will dampen the soil, while too much water will cause erosion and runoff. You can also use barriers such as silt fences and wattles for dust control. It is important to note that most states have regulations on barriers and how they should be constructed. It is also essential to install the barriers in the right way to ensure that they serve their purpose.
Dust control is not just for convenience. It is also important for construction workers’ health. Dust on the worksite can cause breathing difficulties among workers. Make sure that the dust control systems on your worksites are up to date to ensure that you keep your licensing requirements fulfilled.
